======================================================================
                  Halcyon Monitoring Solutions
                      www.HalcyonInc.com

               Neuron Integration for HP OpenView
                         Version 1.1.3

                         README.config
======================================================================


Overview
======================================================================
This README.config file describes how to configure the Neuron
Integration for HP OpenView.

This file consists of the following sections:
   - Integration Configuration: Directory Structure
   - Integration Configuration: Action Configuration 
   - SNMP MIB Files


Integration Configuration: Directory Structure
======================================================================
All necessary configuration, log, and data files can be found in the
[LOCALDIR] folder (where [LOCALDIR] is typically /var/opt/HMF).

The contents of this folder are as follows:
  [LOCALDIR]/
    + conf              - configuration files
    + logs              - log files


Integration Configuration: Action Configuration 
======================================================================
In order to use the Neuron Integration for HP OpenView, an HP OpenView
action must be defined within a Neuron Portal Rule that will tell the
HP OpenView Integration of events to forward to OpenView.

The Halcyon Neuron Event Manager should be used to setup an HP OpneView
action within a rule.  When the given rule matches an incoming event,
the OpenView action will be triggered and the event will be forwarded
to the HP OpenView server specified with the action.


SNMP MIB Files
======================================================================
Halcyon provides MIB files describing the format of the SNMP traps
being sent to HP OpenView.  HP OpenView can use these files to map
the OIDs which are inside the SNMP trap to object names from the
MIB file.

The Halcyon MIB files can be found at the following locations:

    [LOCALDIR]/conf/module/GenericAdapter_v1.mib
    [LOCALDIR]/conf/module/GenericAdapter_v2.mib

A description of these MIBs can be found at:

    [LOCALDIR]/conf/module/GenericAdapter.txt


---//---